News Center-So-and-so manufacturing co., LTD

News Center

Company News Industry News Faq

News Center

Jul
21-2022
Why should the hydraulic breaking hammer be warmed up before use
The power source of the hydraulic breaking hammer is the pressure provided by the excavator, loader or pump station, which can more effectively break rocks and rocks in engineering construction and improve the working efficiency. We need to warm up the machine before using the hy...
Jul
20-2022
Correct Operation Procedures for Hydraulic Crushing Hammer
Preparation before crushing(1) Stop the operation immediately when the tubing is found to be loose.When the high-pressure or low-pressure hoses of the hammer are excessively loose, stop the operation immediately and check and repair immediately. At the same time, for caution, it ...
Jul
20-2022
Connection method of breaking hammer and excavator
The breaking hammer is connected with the excavator through a diverter valve. The diverter valve has four oil ports, each of which is marked with "P", "A", "H" and "T" ports. As a professional manufacturer of breaking hammer, the connection method between the lower breaking hamme...
Jul
14-2022
Connection of breaking hammer tool and bit
The commonly used thread types are: corrugated thread, anti sawtooth thread and trapezoidal thread. The direction of rotation of the thread is left (that is, opposite to the direction of rotation of the rotary mechanism of the rock drill). Figure 3-5 shows the drill bit for cone ...
Jun
29-2022
Why to avoid excessive air strike of breaking hammer
The application of the breaking hammer in the project construction has brought great convenience to the construction personnel. However, as a kind of breaking hammer tool, the breaking hammer is easy to be damaged if the operator does not operate it properly. When we use the brea...
May
12-2022
Differences between hydraulic control and electric control lines of hydraulic shear
The main way to control the pipeline of the hydraulic shear is to control the hydraulic control and electric control. Customers can choose according to their own working conditions and equipment conditions. Here's the difference between the hydraulic control and electric cont...
May
10-2022
Methods to prevent the oil circuit of the breaking hammer from being polluted
For the breaking hammer, the working efficiency is very high, but the quality of the hydraulic oil will directly affect the damage of the breaking hammer components and the normal operation of the breaking hammer. Therefore, we should take effective measures to prevent the oil ci...
Nov
10-2021
The service life of the hydraulic hammer depends on the correct selection of the drill rod
Now, with the continuous development of domestic science and technology, and the continuous improvement of equipment in all walks of life, the research and development of one of the excavator's equipment, the breaking hammer, is also being upgraded. You should know that the h...

10 Bar/page All 18 Page：2/2

First 12 Last

Focus on industry development and understand cutting-edge information

Jul
21-2022

Jul
20-2022

Jul
20-2022

Jul
14-2022

Jun
29-2022

May
12-2022

May
10-2022

Nov
10-2021

Consulting

Focus on industry development and understand cutting-edge information

Jul21-2022

Jul20-2022

Jul20-2022

Jul14-2022

Jun29-2022

May12-2022

May10-2022

Nov10-2021

Consulting

Jul
21-2022

Jul
20-2022

Jul
20-2022

Jul
14-2022

Jun
29-2022

May
12-2022

May
10-2022

Nov
10-2021